Key Models

BROMPTON KEY MODELS

See Bromptons being made in the London, England factory

These six bikes offer a snapshot of our full range and are some of our most popular configurations. Each key model is available in all-steel and Superlight spec [-X]. Weights include everything, even the removable battery lights (yes, with batteries in them).

KEY MODEL S2L/S2L-X
The S-Type's sporty character is complemented by our nimble 2-speed derailleur gearing. Avoiding hub gears results in a light bike that can handle most journeys.
Supplied with mudguards and battery lighting.
23.5 - 21.6 lbs (10.7 - 9.8 kg)

KEY MODEL M3L/M3L-X
The classic Brompton, featuring the new BSR Sturmey Archer 3-speed hub. A versatile combination for the all-rounder in our Key Model line up.
Supplied with mudguards and battery lighting.
25.3 - 23.1 lbs (11.5 - 10.5 kg)

KEY MODEL P6R/P6R-X
With a rear rack for additional luggage carrying and 6 well-spaced gears, more kit mreans more weight, but the P6R is designed with longer trips, rather than short commutes, in mind.
Supplied with mudguards, rear rack and Shimano hub-dynamo lighting.
27.3 - 25.3 lbs (12.4 - 11.5 kg)

THE FRONT CARRIER SYSTEM

The Brompton system is extremely convenient for taking luggage on the bike • it only takes a moment to attach or release it. Moreover, with the load, in effect, secured directly to the main frame, the steering is hardly affected. The system is a delight to use. and we strongly recommend it if you regularly need to take luggage or shopping with you.

The principal elements of the front carrier system are:

1. the front carrier block and clip, which is secured to the bicycle frame; 2. the front carrier frame, which latches onto the block; 3. the pannier bag or the basket bag, which fit over the carrier frame.

The pannier bag and the basket bag are normally sold ready for use (i.e. fitted over the front carrier frame), and as such are respectively called the cloth pannier and the folding basket: the individual items can, though, be bought separately.

Front carrier block and clip:

A mounting kit is provided, and with this the block is made fast to the bicycle. The block itself is immensely strong, and it has a sprung clip to ensure that luggage remains in place when riding. The block does not project from the folded package.

Front carrier frame:

This is a brazed, tubular steel frame, with a plated finish. The top member of the frame acts as a carrying handle: the base of the frame gives support for the contents of pannier or basket. This frame may also be used on its own to carry other luggage secured to it.

Cloth pannier:

This is made to our design from tough waterproof nylon fabric. The main compartment has a divider for keeping papers separated from other articles. At the back, there are two pockets for items such as tools, maps etc. Total capacity is 22 litres. All the compartments have zip fasteners.

This is a dual purpose option as, off the bike, the pannier is a practical holdall in its own right.

Folding basket:

Again to our design, and using the same material as the pannier, this provides a large, open-top container. ideal for shopping. Mounted on the bike, the shape is maintained by virtue of a simple bracing frame: this bracing frame is free to pivot up to lie flush with the backing frame, so that when the basket is not in use, it assumes a virtually fiat shape for storage.

Drainage holes are provided in case of rain. When used as a basket off the bike, it has the character part bag/part basket, and occasionally it is necessary to take care stowing goods to make sure it stands up. Capacity is 24 litres

OTHER OPTIONAL ITEMS

Saddle Position:

In the normal configuration, the saddle is 985mm from the ground (750mm from the bottom bracket):

If you need a higher saddle and you can live with its projecting slightly from the folded package, you should fit a saddle adapter pin (pointing up) and/or a longer seat pillar (note: additional height is also possible by fitting other types of saddles, and we would be able to advise you about your options.

1. Saddle adapter pin:

a) mounted "pointing down", it allows the saddle to be moved up to 40mm forward (which also makes the folded package the most compact)

b) mounted "pointing up", it allows the saddle to be moved up to 30mm higher.

2. Extended seat pillars: there are two sizes, the SP3P and the SP6P, which are respectively 30mm and 60mm longer than the standard seat pillar. Thus with both saddle adapter pin and the longest seat pillar, you can obtain, with a Brompton saddle, a height up to 1065mm from the ground.

Cover and Saddle Bag:

In many situations, for instance on trains, or when the bike is dirty, a cover is useful. The Brompton cover is easy to fit or remove, and it can be drawn tight around the base of the bike by using the pull cord fitted. A flap in the top of the cover allows you to pick up the bike in the normal way. The saddle bag is provided as a place to keep the cover when it's not in use.

The Brompton and its various accessories offer countless practical and enjoyable new uses for a bicycle. As a result of ingenious design, sound engineering and great attention to detail, you can expect a lifetime of dependable service from our products.

C.M. Wasson Co. Authorized Brompton Dealer
423 Chaucer St. Palo Alto, CA 94301 Tel: 650- 321-0808